Download Print this page

Specifications - NETGEAR ProSafe AX742 Installation Manual

Prosafe 24 gigabit ethernet stacking kit

Advertisement

AX742v1h3_IG_2oct2012.fm Page 2 Thursday, October 4, 2012 11:03 AM

Specifications

Specifications
Standard
IEEE 802.3ak, 10GBASE-CX4
Dimensions (H x W x D)
1.20 in. x 2.92 in. x 6.13 in.
(30.5 mm x 74.1 mm x 155.7 mm)
Weight
0.317 lb (0.144 kg)
Operating temperature
32 –122ºF (0 – 50ºC)
Storage temperature
32 – 158ºF (0 –70ºC)
Operative relative humidity
10 – 90% noncondensing
Max. power consumption
0W
MTBF
885 years (at 25ºC); 252 years (at
55ºC)
Regulatory Compliance
Certificate of Manufacturer/Importer
It is hereby certified that the NETGEAR model AX744 has been suppressed in
accordance with the condition set out in MBPT-Amtsb|Vfg 243/1991 and vfg 46/
1992. The operation of some equipment (for example, test transmitters) in
accordance with regulation may, however, be subject to certain restrictions. Please
refer to the note in the operating instructions. Federal Office for Telecommunications
Approvals has been notified of the placing of this equipment on the market and has
been granted the right to test the series for compliance with regulation.
Note:This device has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
October 2012
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
You can get the hardware and software manuals for managed switches online at
http://downloadcenter.netgear.com
or through a link in the switch user interface or
resource CD.
This symbol appears in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE directive). If you dispose of this product in the
European Union, treat and recycle it in accordance with your jurisdiction's laws that implement the
WEEE directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.

Advertisement

loading