Table of Contents
Advertisement
Wireless-G Access Point with SRX
The Administration - Log Tab
On this screen you can configure the log settings.
Management
You can have logs that keep track of the Access Point's activities.
Log
To enable the Log support feature, select Enabled. Otherwise, select Disabled.
Figure 6-15: Administration - Log Screen
Logviewer IP Address. If you have chosen to monitor the Access Point's traffic, then you can designate a PC that
will receive permanent log files periodically. In the field provided, enter the IP address of this PC. To view these
permanent logs, you must use Logviewer software, which can be downloaded free of charge from
www.linksys.com/international.
View Log. To see a temporary log of the Access Point's most recent activities, click this button. Click the Save
Log button to save the log activity to a file. Click Refresh to refresh the screen. Click Clear to clear the entries.
Click Close to close the screen.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Click Help for more information.
Figure 6-16: View Log Screen
Chapter 6: Configuring the Wireless-G Access Point with SRX
31
The Administration - Log Tab
Advertisement
Table of Contents
