Chapter 4: Connecting The Wireless-G Access Point With Srx; Overview; Connections For Setup; Figure 4-1: Connect The Ethernet Network Cable - Cisco Linksys WAP54GX User Manual

Wireless-G Access Point with SRX
Chapter 4: Connecting the Wireless-G Access Point with
SRX

Overview

This chapter explains how to connect the Access Point for setup.

Connections for Setup

1. Connect your Ethernet network cable to your network router or switch. Then connect the other end of the
network cable to the Access Point's Ethernet port.
2. Connect the included power adapter to the Access Point's Power port. Then plug the power adapter into an
electrical outlet. The LEDs on the front panel will light up as soon as the Access Point powers on.
Proceed to "Chapter 5: Setting Up the Wireless-G Access Point with SRX."

Chapter 4: Connecting the Wireless-G Access Point with SRX

Overview

Figure 4-1: Connect the Ethernet Network Cable

Figure 4-2: Connect the Power

8