Remote Control - Samsung SP-M206 Owner's Instructions Manual

3-3

Remote Control

Using your projector with another remote control device nearby may result in improper functioning due to remote control
code (frequency) interference.
POWER (
) Button
Use this button to turn the projector on
and off.
P.MODE Button
Use to select Picture Mode.
P.SIZE Button
Use to adjust the size of picture
screen.
Rewind Button
Rewind video in <Media Play> mode.
Play button
Play video in <Media Play> mode.
KEYSTONE button
Correct a tilted image.
Pause button
Pause video in <Media Play> mode.
VOL (
) Button
Use to control the volume.
MENU (
) Button
Use to display the Menu Screen.
MEDIA.P Button
Go directly to <Media Play> mode.
Display the menu items while in <Media Play> mode.
HELP Button
Display the button information menu at the bottom of the screen when a
document is being viewed in <Media Play> mode.
Move ( )/ (
Used to move to or select each menu item.
INFO Button
Use to check source signals, picture setup, PC screen adjustment, and
lamp lifespan.
Colored buttons (Only available in <Media Play>)
Red : Use to view subtitle while playing a video file.
Green : Use to set <SlideShow Settings> while playing a photo file.
Yellow : Use to set <Zoom> in document view.
Blue : Use to move pages using <Page Navigation> Menu in document
view.
3-3
) Buttons
QUICK Button
Use to quickly return to the last menu
used.
AUTO Button
Automatically adjust the screen. (Only
enabled in <PC> mode.)
BLANK Button
Use to turn off the screen and sound
temporarily.
The video and audio will come back
on when any button other than the
[POWER] button is pressed.
Fast forward button
Fast forward video in <Media Play>
mode.
Stop button
Stop video in <Media Play> mode.
DOCU. ZOOM button
Enlarge or reduce a document in the
<Document> menu under <Media
Play> mode.
MUTE (
) Button
Press to mute the sound temporarily.
Press the MUTE button again or the
[VOL] button ( ) when the sound is
muted to hear sound again.
PAGE Button (
)
Use to move to the previous or next
page, one page at a time.
SOURCE Button
Switch the external input signal.
USB SAFELY REMOVE Button
Use to remove a [USB] device safely.
RETURN ( ) Button
Returns to the previous menu.
EXIT (
) Button
Use to make the Menu Screen disap-
pear.
STILL Button
Use to see still images.
INSTALL Button
Use to adjust the image so that it is
appropriate for the projector's installa-
tion location (In front of the screen
and hanging from the ceiling, behind
the screen and hanging from the ceil-
ing, etc.)
Using