Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
Press the MENU button. Press the L or M button to select
1
"Picture", then press the ENTER button.
Press the L or M button to select "PIP", then press the
2
ENTER button.
Press the L or M button to select "Source", then press
3
the ENTER button.
Press the L or M button to cycle through all of the
4
available signal sources: "TV", "AV1", "AV2",
"S-Video1", or "S-Video2".
Note
• The signal from these inputs will not appear if you
have not connected any equipment to the TV's
respective input jacks.
Press the EXIT button to exit.
5
Notes
• The same source cannot be selected on both the main and sub screens.
• PC is not available in PIP picture.
T V
Picture
Mode
: Dynamic
Size
: Wide
Digital NR
: On
DNIe Demo
: Off
My Color Control
Energy Saving
: Standard
PIP
Move
Enter
T V
PIP
PIP
: On
Source
: TV
Swap
Size
:
Position
:
Channel
: Air 3
Move
Enter
T V
PIP
PIP
: On
Source
: TV
Swap
Size
:
Position
:
S-Video1
Channel
: Air 3
S-Video2
Move
Enter
√
√
√
√
√
√
√
Return
√
√
√
√
√
Return
TV
AV1
AV2
Return
53