Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as VCR,
DVD, Set-Top Box, and the TV source (broadcast or cable).
Setting the Signal Source
Press the MENU button.
1
Press the ENTER button to select "Input".
➤
➤
Quick way to access viewing an external signal source :
Just press the "SOURCE" button on the remote control.
Press the ENTER button to select "Source List".
2
Press the L or M button to select signal source, then
3
press the ENTER button.
Note
• Only connected devices can be selected.
Press the EXIT button to exit.
4
Notes
• When you connect equipment to the TV, you can choose
between the following sets of jacks: AV1, S-VIDEO1,
COMPONENT 1, COMPONENT 2, PC, or HDMI on the
TV's rear panel and AV2 or S-VIDEO2 on the TV's side panel.
• HDMI input can only be selected when the external device
is turned on and connected via HDMI.
T V
Input
Source List
: TV
Edit Name
Move
Enter
T V
Source List
TV
AV1
: ----
AV2
: ----
S-Video1
: ----
S-Video2
: ----
Component1
: ----
Component2
: ----
†
More
Move
Enter
T V
Source List
...
More
PC
: ----
HDMI
: ----
Move
Enter
√
√
Return
Return
Return
43