Storing Channels in Memory
First, select the correct signal source (Air, STD, HRC
1
and IRC). See steps on previous page.
Press the MENU button. Press the
select "Channel", then press the ENTER button.
Press the L or M button to select "Auto Program",
2
then press the ENTER button.
➤
➤
Quick way to access the Automatic Channel Setting: Just press the
"AUTO PROG." button under the cover of the remote control.
Press the ENTER button.
3
The TV will begin memorizing all of the available
channels.
After all the available channels are stored, the Auto
program menu reappears.
Press the ENTER button to stop.
Press the EXIT button to exit.
4
Notes
• All available analog channels are automatically stored in
memory.
• It takes approximately 3 to 10 minutes to memorize
channels.
38
T V
L or M
button to
T V
Channel
Air/Cable
: Air
Auto Program
Add/Delete
Fine Tune
LNA
: Off
Move
Enter
Return
Channel
Air/Cable
: Air
Auto Program
Add/Delete
Fine Tune
LNA
: Off
Move
Enter
Return
Auto Program
Air 3
Start
Enter
Return
√
√
√
√
√
√
√
√
√
√