Related Manuals for Rosewill RFS-108P
Summary of Contents for Rosewill RFS-108P
- Page 1 8 Ports Green Fast Ethernet PoE Metal Switch RFS-108P User Manual...
- Page 2 Specifications are subject to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Rosewill Inc.
- Page 3 CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Safety Warning Place connecting cables carefully so that no one will step on them or stumble over them.
-
Page 4: Package Contents
Package Contents The following contents should be found in your package: One RFS-108P Switch One power cord This User Guide Racket-mount brackets Wall-mount kit Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. -
Page 5: Front Panel
IEEE 802.3af Power over Ethernet (PoE) Standard Compliant: - Up to 15.4 watts maximum per Port (Port 1~4); - Supports PoE Over Current Protection; - Supports PoE Circuit Shorting Protection - Supports PoE Powered Device(PD) classification identify allows to detect power range ... -
Page 6: Leds Definition
LEDs Definition The switch contain 1x Power LED for the device, 1x 10/100M LED for each port and 1x PoE LED for port 1 ~ port 4. Status Operation Steady Green The switch is powered on Power The switch is powered off 10M: Green The port is connected 100M: Amber... -
Page 7: Power Receptacle
Power Receptacle To be compatible with the electric service standards around the world, the switch is designed to afford the power supply in the range from 100 ~ 240VAC, 50/60Hz. Please make sure that your outlet standard to be within this range. To power on the switch, plug the female end of the power cord firmly into the receptacle of the switch and the other end into an electric service outlet. -
Page 8: Rack Mount Installation
horizontally. Leave a small gap between the head of the screw and the wall. The gap should be big enough for the screw heads to slide into the screw slots and the connection cables to run down the back of the switch. Align the holes on the back of the switch with the screws on the wall. -
Page 9: Network Cables
Repeat the two previous steps for the other side of the unit. Insert the unit into the rack and secure with suitable screws. Reconnect all the cables. Network Cables In making a switch interconnection, you could use any port to connect another switch with straight or crossover cable. -
Page 10: Network Application
Media Speed Wiring Category3,4,5 UTP/STP 10 Mbps or above. 10/100 Mbps ports 100 Mbps Category 5 UTP/STP or above. Ports that support 10/100 Mbps Category5,5e UTP/STP PoE (Port 1~Port4) or above. Network Application The following picture is an application sample of network topology for your reference: Product Specifications IEEE802.3 10BASE-T... -
Page 11: Appendix A: Troubleshooting
The cable must be less than 100 meters long (328 feet). Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.com for complete warranty information and future support for your product. Rosewill Customer Service Hotline: 1-800-575-9885 techsupport@rosewill.com...
Need help?
Do you have a question about the RFS-108P and is the answer not in the manual?
Questions and answers