NETGEAR ReadyNAS OS 6 Desktop Storage Systems Installation Manual page 8

6. Select the factory default option from the boot menu.
• If you have a 2-bay storage system, do the following:
a Scroll through the boot menu options by pressing the
Backup button.
b When only the Disk 1 LED is lit, press and release the
Reset button.
• If you have a 4-bay storage system, do the following:
a Scroll through the boot menu options by pressing the
Backup button.
b When the status display screen shows the factory
default option, press and release the Reset button.
• If you have a 6-bay storage system:
a Scroll through the boot menu options using the arrows on
the touchpad.
b When the status display screen shows the factory
default option, press the OK button.
The system initiates a short disk test that takes 2 to 5 minutes.
Then, a 10-minute time-out period begins. After 10 minutes, the
factory default process starts.
7. (Optional) Press the Backup or OK button to skip the 10-minute
time-out period and begin the factory default process immediately.
The system returns to its factory default settings and reformats all
installed disks for use with ReadyNAS OS 6.
When the factory default process is complete, the reformatted disks
are ready to use with your system.
8