Specifications - CEN-TECH 60703 Owner's Manual

9. WARNING: Handling the cord on this product will
expose you to lead, a chemical known to the State of
California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)

Specifications

Continuous
Peak
AC Output Voltage
Frequency
Power
Wave Form
Inverter No <0.5A (battery drain with
Load Current no load on Inverter)
Battery 12V, 18Ah, Sealed Lead-Acid
Item 60703
SAVE THESE INSTRUCTIONS.
200W
400W
115V
60Hz
Modified Sine Wave
(non-sinusoidal)
For technical questions, please call 1-800-444-3353.
10. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Booster Cables 26" L With Copper-Plated Clamps
Fuse 12V 40A
Low Voltage
<10.8V - 11.3V
Warning
Low Voltage
8.9V - 9.4V
Shutdown
Functions: 12 Volt Jump-Starter,
300 PSI Air Compressor, 200W Power
Inverter, Power Supply, and Work Lights
1. Specification
Page 5