Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
5
in
CHARGE COMPLETELY
IMMEDIATELY AFTER
PURCHASE.
Fully recharge after
each jump-start.
Fully recharge monthly to
ensure long battery life.
REV 14l
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
1
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 60703
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CEN-TECH 60703
Summary of Contents for CEN-TECH 60703
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 60703 CHARGE COMPLETELY IMMEDIATELY AFTER PURCHASE.
- Page 2 Underwriters Laboratories, Inc. Read the manual before Volts set-up and/or use. Alternating Current WARNING marking concerning Risk of Fire. Amperes Follow connection procedure. Cold Cranking Amps Reserve Capacity Ampere-hours Page 2 For technical questions, please call 1-888-866-5797. Item 60703...
- Page 3 Replace the cord or plug immediately. 4. Do not expose to rain or wet conditions. Water entering the Power Pack will increase the risk of electric shock. Item 60703 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 These carry important safety information. k. Locate Power Pack as far away from If unreadable or missing, contact battery as battery cables permit. Harbor Freight Tools for a replacement. Page 4 For technical questions, please call 1-888-866-5797. Item 60703...
- Page 5 <0.5A (battery drain with Functions: 12 Volt Jump-Starter, Load Current no load on Inverter) 300 PSI Air Compressor, 200W Power Battery 12V, 18Ah, Sealed Lead-Acid Inverter, Power Supply, and Work Lights Item 60703 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 (Not Shown) (Not Shown) Switch Light Front Work Work Light Light Inverter Power Indicator Light Fuse Inverter Switch Connector Inverter Overload 115VAC Indicator Light Outlets Air Hose Compartment Back Figure A Page 6 For technical questions, please call 1-888-866-5797. Item 60703...
- Page 7 4. Plug the Adapter cord into the Charging when charging and the Power Pack must be Input on the front of the unit. unplugged when the unit is fully charged. DO NOT EXCEED MAXIMUM CHARGING TIME. Item 60703 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Inverter’s power overload shut off the appliances and to run them before attempting feature, and cannot be used with this Inverter. to use the Power Pack for AC appliances. Page 8 For technical questions, please call 1-888-866-5797. Item 60703...
- Page 9 11.3V, signalling that the battery is low and the Note: When the battery reaches 9.4V, power unit will soon shut down to prevent damage to the battery. to the Outlets is automatically shut down. Item 60703 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Using Work Lights
4. When the proper inflation level has been reached, push the Compressor Switch to the “O” (OFF) position. 5. Lift the lever and remove the hose. Page 10 For technical questions, please call 1-888-866-5797. Item 60703... - Page 11 2. Before connecting the device, make sure the push the Inverter Switch to the “O” (OFF) Inverter Switch is in the “O” (OFF) position. position and remove the device. 3. Plug the device into the USB Connector. Item 60703 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Battery Disposal
Contact your local city government office for the nearest hazardous waste disposal area in your community. Call 1-800-822-8837 for battery recycling. Page 12 For technical questions, please call 1-888-866-5797. Item 60703... - Page 13 Use only with audio system that has a interference low quality noise filtering. high quality noise filtering system. Follow all safety precautions whenever diagnosing or servicing the Power Pack. Disconnect power supply before service. Item 60703 For technical questions, please call 1-888-866-5797. Page 13...
- Page 14 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Internal parts are not user-serviceable and are not available. Page 14 For technical questions, please call 1-888-866-5797. Item 60703...
- Page 15 31 32 33 14 17 27 26 19 18 Item 60703 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 60703 and is the answer not in the manual?
Questions and answers