CEN-TECH 60703 Owner's Manual page 13

Inverter Troubleshooting
Problem
Lack of Inverter 1. Power Pack voltage
power output.
2. Excessive current drawn
3. Inverter not completely
Inverter LED 1. Inadequate power or
Light off.
2. Inverter is overloaded.
Appliance/device High surge wattage
won't operate. required to start-up.
Picture breaking Signal interference.
up/"snow".
(for television)
Static/noise Using sound system with
interference low quality noise filtering.
Follow all safety precautions whenever diagnosing or servicing the Power Pack.
Disconnect power supply before service.
Item 60703
Possible Causes
at or below 12V.
during operation.
warmed up.
excessive voltage drop.
For technical questions, please call 1-800-444-3353.
Possible Solutions
1. Recharge the Power Pack immediately.
2. Reduce load to 200 watts.
3. Turn off Inverter. Disconnect device. Turn
Inverter on and leave running for at least two
minutes. Turn off Inverter, quickly plug device
to Inverter, making sure device is OFF before
connecting. Turn on Inverter and device.
1. Check Power Pack and recharge
if voltage drops below 12V.
2. Reduce load to 200 watts.
Toggle the Inverter On/Off switch five times in quick
succession to generate the necessary power. If
the device does not turn on or start up after five
cycles, this Inverter will not work with this device.
1. Place Inverter as far as possible from TV.
Use only with audio system that has a
high quality noise filtering system.
Page 13