Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
4
in
CHARGE COMPLETELY
IMMEDIATELY AFTER
PURCHASE.
Fully recharge after
each jump-start.
Fully recharge monthly to
ensure long battery life.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
1
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16i
Advertisement
Related Manuals for CEN-TECH 62453
Summary of Contents for CEN-TECH 62453
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Underwriters Laboratories, Inc. Read the manual before Volts set-up and/or use. Alternating Current WARNING marking concerning Risk of Fire. Amperes Follow connection procedure. Cold Cranking Amps Reserve Capacity Ampere-hours Page 2 For technical questions, please call 1-888-866-5797. Item 62453... -
Page 3: Safety
Electromagnetic fields in 3. NEVER smoke or allow a spark or flame close proximity to heart pacemaker could cause in vicinity of battery or engine. pacemaker interference or pacemaker failure. Item 62453 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Specifications
SAVE THESE INSTRUCTIONS. Specifications Cranking Amps Battery 12VDC, 17Ah Battery Cables 45″ L Maximum Air Pressure 250 PSI Functions: 12 Volt Jump-Starter, Air Compressor, 12VDC Power Supply, and 3 LED Work Light Page 4 For technical questions, please call 1-888-866-5797. Item 62453... -
Page 5: Setup
USB Port 12VDC Outlet Battery Test Button / USB Power Button 120VAC Charging Input Plug Work Light (on back) Button Pressure Gauge Air Compressor Switch Air Hose Comparment Figure A Item 62453 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Input on the back of the Power Pack. 4. Recharge: a. When yellow light comes on while pressing the Battery Test Button. b. After each Jump-Start. c. Once a month. DO NOT EXCEED MAXIMUM CHARGING TIME Page 6 For technical questions, please call 1-888-866-5797. Item 62453...
- Page 7 (7 amps x 12V = 84 Watts) to Electric Cooler run the items. This figure is within the capacity Air Compressor of the unit (10 amps x 12V = 120 Watts). Figure C Item 62453 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Operation
4. When the proper inflation level has been reached, press the Air Compressor Switch off. 5. Lift the lever and remove the hose. Page 8 For technical questions, please call 1-888-866-5797. Item 62453... - Page 9 Power Pack is fully charged. Recharge 3. When finished, unplug the device from the USB Port. as needed, following the instructions in the “Charging the Power Pack” section on page 6. Item 62453 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Maintenance
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-888-866-5797. Item 62453... -
Page 11: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Internal parts are not user-serviceable and are not available. Item 62453 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 62453 and is the answer not in the manual?
Questions and answers