Audio Setting; Function Setting - Panasonic CQ-C8401W Manual

Audio Setting

Adjustment to each speaker and an optional subwoofer
1
Press [VOLUME]
(SEL: SELECT)
to display the
menu display.
2
Press [VOLUME] (SEL: SELECT) to
select a mode to be adjusted.
3
Turn [VOLUME]
clockwise or
counterclockwise
to adjust.
Note: If no operation
takes place for more than 10 seconds in the audio menu
(2 sec. in Main volume adjustment), the display returns
to the regular mode.
Main volume adjustment
(Setting range: 0 to 40, default: 13)
q : Up
w : Down
BASS
(Setting range: -12 dB to +12 dB, 2 dB Step, default:
Bass 0 dB)
q : Up
w : Down
TREBLE
(Setting range: -12 dB to +12 dB, 2 dB Step, default:
Treble 0 dB)
q : Up
w : Down
Note: Do not activate SQ and Bass/Treble at same time
to avoid causing sound distortion.
30
CQ-C8401W/C7401W
SQ preset change
(Adjustable frequency: 60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz),
Setting range: –12 dB to +12 dB, 2 dB Step) (a page 16)
q : Up
w : Down
[ ]
[ : Higher frequency
[ ]
] : Lower frequency
Balance adjustment
(Setting range: L15 to R15 and Center, default: Center)
q : Right enhanced
w : Left enhanced
Fader adjustment
(Setting range: R15 to F15 and Center, default: Center)
q : Front enhanced
w : Rear enhanced
Subwoofer level adjustment
(Setting range : mute (-∞), -6 dB to +6 dB, 2 dB Step,
default: 0 dB)
q : Up
w : Down
Subwoofer Low Pass Filter
(Setting range: 80 Hz, 120 Hz, 160 Hz, default: 80 Hz)
q : Up
w : Down
Subwoofer output range
Other speakers output ranges
High Pass Filter
(Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz,
default: Filter OFF)
q : Up
w : Down

Function Setting

Adjustment to display on the FUNCTION menu
1
Press [MENU] to display the menu dis-
play.
For using the remote
CQ-C8401W
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [ ] or [ ] to display the FUNC-
] [
TION menu.
3
Press [ ] or [ ] to select a function to
} {
be adjusted.
4
Press [BAND]
(SET) to adjust.
CQ-C8401W
5
Press [MENU].
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
MUTE KEY
Setting [MUTE] buttons' functions
: Volume off (default)
: Volume down by 10 steps
: Volume down by 5 steps
SECURITY
Setting the security function (a page 11)
: ON (default)
: OFF
BUILT-IN AMP (Only for CQ-C8401W)
You can toggle the integrated amplifier on and off.
: Amplifier on (default)
: Amplifier off (when the external amplifier is used)
CQ-C8401W/C7401W
31