Double Insulated Tools: Tools With Two Prong Plugs; Extension Cords - Chicago Electric 60662 Owner's Manual

Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq.)
18. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
GROUNDING
AND DEATH FROM
INCORRECT GROUNDING
WIRE CONNECTION: Check
with a qualified electrician if
you are in doubt as to whether
the outlet is properly
grounded. Do not modify
plug provided with tool.
Never remove grounding
prong from plug. Do not use
tool if power cord or plug is
damaged. If damaged, have it
repaired by a service facility
before use. If plug will not fit
outlet, have a proper outlet
installed by a qualified
electrician.
SKU 60662
TO PREVENT
ELECTRIC SHOCK
For technical questions, please call 1-800-444-3353.
Double Insulated Tools: Tools
with Two Prong Plugs
Outlets for 2-Prong Plug
1. Tools marked "Double Insulated" do
not require grounding. They have
a special double insulation system
which satisfies OSHA requirements
and complies with the applicable
standards of Underwriters Labora-
tories, Inc., the Canadian Standard
Association, and the National Electri-
cal Code.
2. Double insulated tools may be used
in either of the 120 volt outlets shown
in the preceding illustration.
(See "Outlets for 2-Prong Plug".)

Extension Cords

1. Grounded tools require a three wire
extension cord. Double Insulated
tools can use either a two or three
wire extension cord.
2. As distance from supply outlet
increases, use a heavier gauge
extension cord. Using extension
cords with inadequately sized wire
causes a drop in voltage, resulting
in loss of power and possible tool
damage. The smaller the gauge
number of wire, the greater capacity
of cord. For example, a 14 gauge
cord can carry a higher current than a
16 gauge cord. (See Table A.)
Page 5