Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MarkBass Super Booster
Summary of Contents for MarkBass Super Booster
- Page 1 v. 8.may.2009 owner’s manual...
-
Page 2: Important Safety Instructions
MORE INFORMATION For warranty and service information, please contact your local Markbass distributor (contact information available at www.markbass.it). For more technical information, please visit us at www.markbass.it and fill out the form on the Contact Us page. We hope you enjoy your effect pedal and use it to make great music! “The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the... - Page 3 3. INTRODUCTION For many Markbass amp users, the VLE and VPF filters are the only EQ knobs they turn! This pedal allows anyone to add these two magic filters to their sound! Even if you already have the filters on your amp, the pedal gives you footswitch control and greater flexibilty. The VLE (Vintage Loudspeaker Emulator) is an adjustable shelf that filters out high frequencies to give you a mellower, less modern sound: it’s especially useful for acoustic and older styles of music.
-
Page 4: Function Overview
1/4” INPUT jACk (CONNECTS TO YOUR INSTRUMENT) (6) - Make sure that your amp is off and the volume is turned down before making connections. Connect your instrument to the input of the Super Booster and the output of the Super Booster to your amplifier. -
Page 5: Limited Warranty
Markbass distributor in your country for details. Please register this product online at www.markbass.it to establish the date of purchase. However, please note that you are required to retain a copy of your receipt as proof of purchase in order to receive warranty service. - Page 6 If any problem occurs please don’t hesitate to contact our support team at service@markbass.it . You can fill out this form and send a copy to Markbass (Parsek srl, Via Po 52, 66020 San Giovanni Teatino, CHIETI ITALY) or, even better, you can now register your warranty online in a matter of minutes, using our online registration form at www.markbass.it.
-
Page 7: Getting Started
6. GETTING STARTED 7. TEChNICAL SPECS BOOST - To set up the Level Boost, plug your instrument into the Input jack (6), and con- InPut IMPedance: 300 Kohm nect the Output jack (7) to your amplifier. Turn the effect on using the left footswitch (4), outPut IMPedance XLr: 600 ohm making sure the LED is ON (this indicates that the effect is active). - Page 8 Product specifications are subject to change without notice Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52 - Tel. +39 085 446 3755 - Fax +39 085 440 7764 - www.markbass.it - info@markbass.it...
Need help?
Do you have a question about the Super Booster and is the answer not in the manual?
Questions and answers