Table of Contents
Advertisement
Turn the television on (any channel is okay).
Aim the VCR's remote control at your TV set. Hold down the TV button
(not the VCR/TV button) while you press the number corresponding to your
brand of television as shown in the chart (page 41).
For example, if you have an RCA television, press TV and 0 at the same
time. If this button combination sends a signal that matches your TV, the
channel will change on the TV, and you'll know the remote is set to control
the television.
Advanced Operations (Remote Control of TV)
If that button combination does not change the TV channel, go through the
whole list of button combinations one by one until you find one that does
change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the number buttons.
One of them may work for you.
If the TV channel still doesn't change after going through all the button
combinations listed, it is likely that you will not be able to program this remote
control for your TV.
TV Brands
Hitachi
Zenith
Sony
Magnavox
Sanyo
Gold Star 1
Toshiba
Gold Star 2
Panasonic 2
RCA
Panasonic 1
Mitsubishi
JVC
Sharp 1
Sharp 2
Press TV and This Number
2
3
4
5
6
7
8
9
0
CHANNEL (up arrow)
CHANNEL (down arrow)
100/ENT
LAST CH
DISPLAY
1
Advertisement
Table of Contents
