Setting The Clock - Hitachi VT-F390A Owner's Manual

1 CHANNEL
Press 1 to select the type of receiving setup you have:
<ANT> Internal or external antenna
<CATV1> Ordinary cable
<CATV2> Alternate cable (if CATV1 doesn't give you the channels you
expect)
2 MOVIE
Press 2 to select whether you want prerecorded movies (safety tab removed)
to play automatically when loaded, and then rewind, eject and turn off the
power when done. Options are <ON> and <OFF>.
3 HIFI/LINEAR
Press 3 to control how the audio signal is processed by the VCR. Options
are <HIFI> and <LINEAR>.
4 STEREO/MONO
Press 4 to control how the audio signal is recorded and sent to the TV.
Options are <STEREO> and <MONO>.
5 SAP
Press 5 when you are ready to record a second audio program. Options are
<OFF> and <ON>.
7 AUTO CHANNEL SET
Press 7 to automatically program the VCR to receive all the channels that
come in on your antenna or cable.
8 ADD/ERASE CHANNEL
Press 8 to bring up a screen that lets you add new channels or limit the
channels to the ones you most often watch.

Setting the Clock

This is easy to do and important for your later timed recordings.
You'll need to set the clock when first hooking up your VCR, and any time
the power goes out more than 1 hour.
When you first plug in the VCR or after a power outage, the clock display will
read "--:--".
To set the clock, press GUIDE, then press 1 to bring up the Clock Set
screen:
Press the number buttons on the remote control to set the current time - two