Getting Started (Controls); Quick Tour Of The Controls; Remote Control Buttons - Hitachi VT-F381A Owner's Manual

Getting Started (Controls)

Getting Started (Controls)

Quick Tour of the Controls

Study these pictures carefully to learn about the buttons and controls that
you'll need for everyday operation. Various controls are explained
throughout this manual as they are needed, but now is a good time to get
familiar with their locations.
Most of the time, you'll be directing the VCR from the remote control, but
there are some controls on the VCR that will come in handy too.
When you're familiar with these basic controls, proceed to Initial Setup
(page 20). We'll show you how to program your local channels and set
the clock to make your VCR fully functional.
Pressing a button on the remote control transmits an invisible beam of
light (infrared) to a receiver at the right front of the VCR.
When using the remote, aim the front end toward the VCR and make sure
nothing - such as a coffee table or your dog - is blocking the path of the
infrared beam.

Remote Control Buttons

Remote Control Illustration
POWER Turns the VCR on and off
GUIDE Brings up an on-screen setup and programming guide, the Easy
Guide System.
DISPLAY Used in on-screen programming and indexing.
CLEAR Used in on-screen programming and indexing.
VCR/TV Switches between viewing through the VCR and not viewing
through the VCR.
VOLUME Increase or decrease the audio volume.
MUTE Turns off the audio until you press MUTE again.
REW Rewinds the videotape.
PLAY Starts playing a loaded videocassette.
REC Starts recording on the station the VCR is set to.
How the Remote Control Works
14