Set The Rf Or Video Channel Switch - Hitachi VT-F381A Owner's Manual

Getting Started

7 Set the RF or Video Channel Switch

When the VCR is on, its video signal can come into your TV on either
channel 3 or channel 4. You need to select the appropriate channel.
Turn the power on to both the TV and the VCR, and look for a switch on
the back of the VCR. Set the switch to 3 or 4, whichever is not a
commercial channel in your area.
Your basic hookup is now complete. When you're ready to try hooking up
a second VCR or a video camera for a complete home entertainment
system, see Advanced Operations.
Now turn the TV and VCR back around facing you and begin your quick
tour of the controls (page 15).
13