Reviewing What You Have Programmed - Hitachi VT-F370A Owner's Manual

Basic Operations (Recording)
Basic Operations (Recording cont.)
PROGRAM 1
CH
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED
FILL IN BLINKING SPACE
PRESS CLEAR TO CORRECT
*TO END PRESS GUIDE
Now fill in the blanks:
Select channel 8 by pressing 0 and 8 on the remote control.
Enter the start time by pressing 0, 6, 0, and 0 for 6 o'clock. Then press 2 for PM.
Enter the end time, half past six, as 06:30. The VCR automatically selects PM for you.
The screen shows today's date, so no changes are needed on that line.
Press TAPE SPEED to switch to SP because you want the best quality picture for this recording.
Everything is as you want it, so press GUIDE to set the program in memory.
Insert a videocassette, and power off the VCR. Check for the delayed recording indicator on the VCR's
display. Prepare to admire yourself on the evening news.

Reviewing What You Have Programmed

You can look back over any of the recordings you have preset, and if you need to, clear out any of the
programs. Normal programs will clear automatically once recording is complete, but daily and weekly
settings must be cleared out manually.
Press GUIDE twice, then press 6 for the PROGRAM REVIEW option. This brings up the screen
settings for the first program. Keep pressing 6 to cycle through all the programs you have preset.
To remove a program, press CLEAR. The screen will display the next program, if there are more, or it
will switch back to the main menu.
<ONE TIME>
--
EP
42
pg. 38