Reviewing What You Have Programmed - Hitachi VHS VT-S772A Owner's Manual

Hitachi vhs owner's manual vt-s772a

Hide thumbs

Table Of Contents

Table of Contents

Basic Operations (Recording)

L1 or L2 instead of the channel number. L1 is for recording from the rear

AUDIO/VIDEO IN jacks and L2 is for recording from the front AUDIO/VIDEO IN jacks.

When everything is set as you want (even though some items may still be flashing),

press TRANS while aiming the remote control to the VCR to program your settings into

memory.

To preset additional recordings, press PROG then repeat these steps. Otherwise,

press CLOCK to return to clock display.

Don't forget to load a videocassette to record on.

Your delayed recording settings take effect when you turn off the power on the VCR.

Press POWER and then immediately - within 10 seconds - press the STOP button

(use buttons on the remote or VCR as you wish).

An Example

Let's say you were interviewed today by a local TV reporter. You're eager to see

yourself on the evening news tonight. The news comes on channel 8 at 6 0'clock - but

you've got a meeting scheduled during that time. Luckily you just purchased this

Hitachi VCR.

Press PROG to bring up the display:

Now fill in the blanks:

Select channel 8 by pressing 0 and 8 on the remote control.

Enter the start time by pressing 9 for PM and 0, 6, 0, 0 for 6 o'clock.

Enter the end time, half past six as 06:30. The VCR automatically selects PM for

you.

The display shows today's date, so no changes are needed on that line. If you want

to record the daily or weekly program, press 4 for DAILY or 7 for WEEKLY.

Press TAPE SPEED to switch to SP because you want the best quality picture for

this recording.

Everything is as you want it, so press TRANS while aiming the remote control to the

VCR to set the program in memory.

Insert a videocassette, and power off the VCR. Check for the delayed recording

indicator on the VCR's display. Prepare to admire yourself on the evening news.