Table of Contents
Advertisement
Advanced Operations (Cable Box Hookups)
Advanced Operations (Cable Box Hookups cont.)
Option 4
If none of the preceding hookups work, check with your cable company. You may need to purchase a
video switching system from your local electronics or video retailer. This will easily handle most hookup
problems.
Remote Control of the Cable Converter
If you have a cable converter, you will probably want to program your VCR's remote control so you can
easily change channels. The process is the same as for programming the remote to operate your TV. For
additional details, see page 40.
Hold down the CATV button and press the number of your brand of cable box (shown in the chart).
If that button combination does not work, or if your brand is not on the chart, just go through all the button
combinations until you find the one that works best.
Cable Converters
Jerrold 1
Jerrold 2
Jerrold 3
Hamlin
Zenith
Scientific Atlanta
Pioneer
Philips
To operate the cable box once the remote is programmed for it:
Press CATV and then the button of the function you want.
Press VCR to operate your VCR with the remote again.
Press CATV and This Number
1
2
3
4
5
6
7
8
49
pg. 45
Advertisement
Table of Contents
