Routine Maintenance - Kodak NovaJet 850 Training Manual

E. Routine Maintenance
Technical Bulletin 3)
Perform routine maintenance at recommended
plot time hours and in accordance with prescribed
documentation. The printer must be cleaned and
serviced routinely (i.e. weekly or bi-weekly) or
print output anomalies or premature printer
failures may occur during normal operations.
Inkjet Printer Cleaning Kit, part number 216883-
00, is available for order.
It is suggested to remove power from the printer and remove media from the printing
area prior to performing routine maintenance.
INTERVAL
75 Plot Hours
- Apply solution to lint-free towel and thoroughly
clean platen surfaces (printing area) and cutter
groove bottom surface. Use a toothpick to help
remove residue/debris from the cutter groove. If
the cutter groove is not cleaned adequately this
can lead to paper sensing errors, resulting in
'no printing' symptoms.
- Using a toothpick ensure the platen vacuum holes are free of obstructions.
INTERVAL
20 Plot Hours
- Remove the service station by gently
pulling at securing tab at right side of
station. Immerse service station under
warm running tap water for 1-2 minutes.
Wipe residues away from wipers using
solution applied to a lint-free towel. Dry
service station and re-install.
I
NTERVAL
20 Plot Hours/Idle >100 hrs Cartridge Jet Area
(same as
COMPONENT
Platen/Cutter Groove
COMPONENT
Service Station
COMPONENT
NovaJet 800 Series Training Guide
CLEANING AGENT
NovaKlean /Distilled Water
CLEANING AGENT
NovaKlean /Tap Water
CLEANING AGENT
NovaKlean /Distilled Water
19