Suspend To Ram Mode; Suspend To Disk Mode - Hitachi SA200 Series Manual

lonestar.boo : sa200.fm Page 68 Friday, March 6, 1998 10:53 AM
5 The Power System

Suspend to RAM Mode

Suspend to RAM mode is one of the SA200's power saving modes.
When you enable your laptop's power management functions in
the BIOS Setup program, the system automatically enters Suspend
to RAM mode when the Suspend to RAM timeout period elapses
or when you close the display.
Press <Fn+F3> to manually send the system into Suspend to RAM
mode.
The following events occur when your system enters Suspend to
RAM mode:
•
All data in memory is saved to RAM.
•
Current system states are saved to RAM.
•
The system turns off all devices except memory.
•
The Suspend to RAM indicator blinks.

Suspend to Disk Mode

Suspend to Disk mode is the SA200's maximum power saving
mode. When you enable your laptop's power management
function and create a Suspend to Disk partition using the Suspend
to Disk program, the system automatically enters Suspend mode
when the Suspend to Disk timeout period elapses.
Press <Fn+F2> to manually send the system into Suspend to Disk
mode.
The following events occur when your system enters Suspend to
Disk mode:
•
All data in memory is saved to the hard disk.
•
Current system states are saved to the hard disk.
•
The system turns off.
68 SA200