Turning Your Laptop On; Figure 7 Connecting The Ac Adapter - Hitachi SA200 Series Manual

lonestar.boo : sa200.fm Page 16 Friday, March 6, 1998 10:53 AM
2 Getting Started

Figure 7 Connecting the AC Adapter

Open the LCD cover by first sliding the display panel
3.
latch to the left and then lifting the display panel open.
Check the SA200's Battery Status indicator and AC
4.
Power Status indicator. The battery status should be on
if the battery is not full.
If the Battery Status indicator does not light, make sure
5.
all connections are secure. If there is still a problem,
unplug the adapter and contact your dealer.
See "Charging the Battery Pack" on page 62 for more information.

Turning Your Laptop On

Connect the laptop to an AC power source and open the
1.
LCD cover as described in the preceding section.
16
Your laptop comes with its own special AC
adapter.
•
Do not use a different AC adapter to power
the computer! This can seriously damage
your laptop!
•
Do not use the laptop's AC adapter to power
other electrical devices!
SA200