Touchpad Operations; Using The Touchpad - Hitachi SA200 Series Manual

lonestar.boo : sa200.fm Page 29 Friday, March 6, 1998 10:53 AM
Fn+
Decreases the display contrast and saves the new setting.
(SCC LCD panel only)
Fn+
Increases the display contrast and saves the new setting.
(SCC LCD panel only)
Fn+F11
Blanks the display to save power.
Fn+F12
Toggles the display between the LCD, CRT and both
LCD and CRT.

TouchPad Operations

Your laptop's TouchPad is a pressure-sensitive pointing device
that provides all the functionality of a mouse or a trackball. The
two "click" buttons on the TouchPad have the same functions as
the right and left buttons on a standard mouse.
Your SA200 also allows you to attach an external pointing device
such as a mouse. For more information, see "Connecting an
External Pointing Device" on page 47.

Using the TouchPad

Place your left or right hand next to the TouchPad and rest your
wrist naturally in a relaxed manner. Place your thumb or forefinger
on the TouchPad. Move your finger across the pad.
The rectangular TouchPad acts like a miniature duplicate of your
built-in display. To move the cursor, slide your finger over the pad.
The TouchPad is very sensitive. You do not need to exert much
pressure on it.
SA200
Decrease Contrast
Increase Contrast
Blanks the Display
Toggles LCD/CRT/Simultaneous Display
3 Using Your Laptop
29