Exchanging The Peripheral Bay Modules; Figure 20 Exchanging Peripheral Bay Modules - Hitachi SA200 Series Manual

lonestar.boo : sa200.fm Page 54 Friday, March 6, 1998 10:53 AM
4 Connecting and Installing Optional Devices

Exchanging the Peripheral Bay Modules

The SA200 right or "peripheral" bay is designed to house either a
floppy disk drive module or a CD-ROM module. Follow these
instructions to remove the peripheral module and insert another
module:
1. Place your system in suspend mode or turn your laptop
off using the Windows 95 Shutdown screen (see page
17).
Place the laptop on a flat surface with the underside
2.
facing up.
Locate the peripheral bay release latch. Refer to Figure
3.
20 on the next page.
Slide the release latch toward the peripheral bay.
4.
Pull the module out of its bay.
5.
Insert the module of your choice. Make sure that the
6.
release latch snaps back into place.
7. Resume from suspend mode by opening the LCD cover
or turn your system on by opening the LCD cover and
pressing the power button (see page 16).

Figure 20 Exchanging Peripheral Bay Modules

54 SA200