Lan Mac Filter; Lan Ip Filter - Huawei E960 User Manual

LAN MAC Filter

Your gateway supports MAC filtering based on a list of either denied or allowed computers.
A common method to restricting network access is to specify the Media Access Control
(MAC) address.
To locate the MAC address in Windows, choose Start > Run, and then enter cmd.
The command window is displayed, enter ipconfig /all, and then press Enter.
The MAC address is displayed as the Physical Address.
1. Click
2. Select MAC Filter Mode.
Mode
Disabled It specifies that the MAC address filter function is disabled.
Allow It specifies that the clients with addresses in the MAC Address list are
allowed to connect with the gateway.
Deny It specifies that the clients with addresses in the MAC Address list are
denied to connect with the gateway.
3. Enter the MAC addresses of the clients and click

LAN IP Filter

You can configure the gateway to block specific IP addresses from accessing the LAN.
Click to access the IP Address Filter window.
Adding an IP Address
1. Select the protocol and status.
2. Enter the IP address and corresponding port to be blocked from accessing the LAN.
3. Click
Modifying an IP Address
1. Click
displayed.
2. Modify the contents as required.
to access the LAN MAC Filter window.
to add the IP address to the table.
in the Modification column. The corresponding IP address filter is
Description
31