The Information Mode - NordicTrack NTL61011.2 User Manual

THE INFORMATION MODE

The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
1. Select the information mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
The time display will show the total number of
hours that the treadmill has been used.
The distance display will show the total number
of miles (or kilometers) that the walking belt has
moved.
The lower section of the display will show the
status of an iFit Live module. If an iFit Live mod-
ule is connected, the display will show the words
WIFI MODULE. If a USB module is connected, the
display will show the words USB/SD MODULE. If
no module is connected, the display will show the
words NO IFIT MODULE.
2. Select the optional screens.
While the information mode is selected, the matrix
will display several optional screens. Press the
decrease button next to the Enter button to select
each of the following screens:
a. UNITS: To change the unit of measurement,
press the Enter button. To view distance in miles,
select ENGLISH. To view distance in kilometers,
select METRIC.
b. DEMO: The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. While the demo mode is turned
on, the console will function normally when you
plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key,
the displays will remain lit, although the buttons
will not function. If the demo mode is turned on,
the word ON will appear in the matrix. To turn
on or turn off the demo mode, press the Enter
button.
c. CONTRAST LVL: Press the Incline increase and
decrease buttons to adjust the contrast level of
the display.
If a module is connected, you may also select the
following screen:
d. TRAINER VOICE: To turn on or turn off the
voice of the personal trainer, press the Enter
button.
If an iFit Live module is connected, you may also
select the following screens:
e. DEFAULT MENU: The default menu will appear
when you insert the key into the console or when
you press the Home button. Press the Enter but-
ton repeatedly to select the manual main screen
or the iFit Live screen as the default menu.
f. CHECK WIFI STATUS: Press the Enter but-
ton to check the status of your iFit Live module.
The lower display will show the software version
number, the network SSID, the network encryp-
tion type, the connection status, the wireless
signal strength, the IP address of the module, the
number of registered users and their names, the
results of the DNS lookup, and the status of the
iFit Live server.
g. SEND/RECEIVE DATA: To send and receive
workouts, workout logs, and updates, press the
Enter button. When the process is finished, the
words TRANSFERS DONE will appear in the
display.
3. Exit the information mode.
To exit the information mode, remove the key from the
console.
21