Status:
Displays the current status of the Access
Point.
Model:
Displays the model number of the Access
Point.
Name:
Displays the name of the Access Point.
MAC Address:
Displays the MAC address of the Access
Point.
IP Address:
Displays the IP address of the Access Point.
Firmware Version: Displays the current firmware version of the
Access Point.
To upgrade, please follow the steps below:
1. Click on Upload New File to mount AP firmware onto
EWS Switch flash
2. Once the Access Point firmware is downloaded
onto the Controller, the list of Access Points that were
selected for the firmware upgrade will appear under
Device List.
3. Select the Access Points you wish to upgrade and
click Add to Upgrade to start the firmware upgrading
process.
64