EnGenius EWS5912FP User Manual page 153

VLAN ID: Enter the VLAN ID to which the IP address
is attached in IPv4-Based ACE. The range is
from 1-4094.
802.1p Value: Enter the 802.1p value. The range is from
from 0-7.
Ethertype Value: Enter the Ethertype value. The range is
from 05DD-FFFF.
ICMP: Select Any, Protocol ID, or Select from List
from drop down menu.
the ACE to which the packet is matched.
The range is from 0-255.
from the list in the provided field.
ICMP Code: Enter the ICMP code. The range is from
0-255.
Source Port: Select Single or Range from the list. Enter
the source port that is matched to packets.
The range is from 0-65535.
Destination Port: Select Single or Range from the list. Enter
the destination port that is matched to
packets. The range is from 0-65535.
Type of Service: Enter the DSCP. The range is from 0-63.
• Protocol ID – Enter the protocol in
• Select from List– Select the ICMP
Click Apply to save the changes to the system.
153