EnGenius EWS5912FP User Manual page 115

Oper Interval:
Max Response
Interval:
Oper Max Response
Interval:
Last Member Query Counter: Enter the number of the opera-
Oper Last Member
Query Counter:
Last Member
Query Interval:
Oper Last Member
Query Interval:
Displays the IGMP Interval of the
operational querier.
Enter the maximum response
time used in the queries that are
sent by the snooping querier.
The default is 10 seconds.
Display the maximum response
time which used in the queries
that are sent by the snooping
querier.
tional last member querier.
Enter the number of IGMP
group-specific queries sent
before the switch assumes there
are no local members.
Displays the Operational Last
Member Query Interval sent by
the elected querier.
Enter the time between two
consecutive group-specific que-
ries that are sent by the querier,
including those sent in response
to leave-group messages. You
might lower this interval to re-
duce the amount of time it takes
a querier to detect the loss of
the last member of a group.
Click the Apply button
Cancel button
to discard them.
115
to accept the changes or the