EnGenius EWS5912FP User Manual page 13

Dimensions
EWS7952FP
Width: 16.14" Length: 17.32"
2
3
4
5
6
1
7
EWS7952FP - Front
8
1 RJ45 Console Port
2 Power LED: Light off = Power off; Solid Light = Power On.
3 Fault LED: Light off = Normal Behavior; Solid Light = Error.
4 PoE Max LED: Light off = Additional PoE device may still be added;
Solid Light = The PoE device's output power has exceeded total
PoE limit. No additional devices can be powered on via PoE.
5 LAN Mode LED: Light off = LAN mode is not activated; Solid Light
= LAN mode is activated.
6 PoE Mode LED: Light off = PoE mode is not activated; Solid Light
= PoE mode is activated.
7 LED Mode Selector: Press to change between LAN and PoE mode.
8 Reset Button: Press to reset the device to factory default settings.
9 RJ-45 LAN Ports: 10/100/1000 Mbps RJ-45 LAN ports.
10 LAN Mode LED (Per Copper Port): Light off = No link is
Height: 1.73"
10
11
9
14
13
15
EWS7952FP -Back
established on the port; Solid Amber Light = A valid 10/100 Mpbs
link is established on the port; Solid Green Light = A valid 1000
Mbps link is established on the port.
11 Link/Act LED (Per Copper Port): Light off = No link is established
on the port; Solid Light = A valid link is established on the port;
Blinking Light = Packet transmission on the port.
12 Uplink Ports: Gigabit Ports
13 SFP Ports: Small form factor pluggable ports.
14 Speed LED (Per SFP Port)
15 Link/Act LED (Per SFP Port): Light off = No link is established on
the port; Solid Amber Light: A valid 100 Mpbs link is established on
the port; Solid Green Light: A valid 1000 Mbps link is established on
the port.
16 Power Connector
13
16