Hitachi 42EDT41A Operating Manual page 63

RGB ON SCREEN DISPLAY
HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
AUTO ADJUST
for current RGB format are adjusted automatically.
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select Return
NOTES: • The other functions do not operate while AUTO ADJUST is in progress.
• Allow the Plasma TV to warm up for 20 minutes before performing AUTO ADJUST.
• Select a bright image for display while AUTO ADJUST takes place.
• If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
• Always reset AUTO ADJUST when setting new display setting or when changing to a new
external component.
This feature allows you to adjust the horizontal position of the display.
H POSITION
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select Return
V POSITION
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Return
Select
Adjust
0
0
0
0
Reset
Exit
Adjust
0
0
0
0
Reset
Exit
This feature allows you to adjust the vertical position in RGB mode.
Adjust
0
0
0
0
Reset
Exit
Use CURSOR buttons , cursors to highlight adjust.
Press the OK button to select AUTO ADJUST.
Use CURSOR buttons ,
Press the RETURN button to return to previous menu item.
Press MENU to quit.
Use CURSOR buttons ,
Press RETURN button to return to previous menu item.
Press MENU to quit.
63
to adjust the horizontal position.
to adjust the vertical position.