Hitachi 42EDT41A Operating Manual page 45

SETUP
Select this feature to manually tune each channel.
Manual
Use the CURSOR buttons ( ,
Channel Number
Use the CURSOR buttons ( ,
Name
Use the CURSOR buttons ( ,
Color System
Use the CURSOR buttons ( ,
NTSC-M).
Skip Use the CURSOR buttons ( ,
channel CH+ ( ) and CH- ( ) buttons. Skip is automatically set to ON for those non-broadcasting channels
after channel search has been made.
NR Use the CURSOR buttons ( ,
on the screen especially in the weaker signal reception areas.
This feature is used to adjust the frequency data for the tuner depending on the user's preference.
Fine Tuning
Use the CURSOR buttons ( ,
Press the Menu button to exit.
If set to ON, the power will be turned off when there is no transmission signal and no operation for about 10
Auto Off
minutes in the TV mode.
Setup
Auto Tuning
Manual
Fine Tuning
Auto Off Off
Select Return Exit
) to select other sub-menu items.
Setup
Auto Tuning
Manual
Fine Tuning
Auto Off Off
Select Return Exit
) to adjust frequency data.
) to set the channel numbers.
) to edit and enter channel name.
) to set and choose between 2 different Color System settings (Auto,
) to set. If this is set to ON, that channel will be skipped while using the
) to set. If this is set to ON, it helps to reduce the noise interference visible
45
Setup
Manual
Channel Number 35
Name ----
Color System Auto
Skip Off
NR Off
Return Exit
Select
35
Setup
0
Fine Tuning
Select Adjust Return