Hitachi 42EDT41A Operating Manual page 47

SETUP
Select the Video input that corresponds to the signal mode of the signal from equipment that is connected to the
Video Input
corresponding video input terminal (AV1, AV2, AV4).
Use the CURSOR buttons ( ,
Use the CURSOR buttons ( ,
AV1: Auto, HDTV, SDTV/DVD
AV2 (1st Step): RGB, Composite/Component
AV2 (2nd Step): Auto, HDTV, SDTV/DVD
AV4: S-Video, Composite
NOTE:
The RGB signal will be automatically recognized.
Select the Audio input that corresponds to the Audio signal from equipment that is connected to the corresponding
Audio Input
audio input terminal (AV1, AV2, AV3, AV4).
Use the CURSOR buttons ( ,
Use the CURSOR buttons ( ,
NOTE:
If the Audio Input is a monaural sound, set to L/Mono.
Scart Output
Set to TV or monitor.
RGB1
Set to DVI-PC or DVI-STB.
RGB2 (1st Step)
Set to RGB or Component.
RGB2 (2nd Step)
Set to Auto, HDTV, SDTV/DVD
Setup
System System 1
Color System
Video Input
Audio Input
Scart Output TV
RGB1 DVI-PC
RGB2 RGB
Auto
Select Return Exit
) to select the Video Input.
) to set the Video Input.
Setup
System System 1
Color System
Video Input
Audio Input
Scart Output TV
RGB1 DVI-PC
RGB2 RGB
Auto
Select Return Exit
) to select the Video Input.
) to set the Audio Input.
Setup
Color System
Select
Setup
Audio Input
AV1
AV2
AV3
AV4
47
AV1 Auto
AV2 Composite/Component
Auto
AV4 Composite
Return Exit
Stereo
Stereo
Stereo
Stereo
Select Return Exit