Rear Panel Jacks - Hitachi 42EDT41A Operating Manual

REAR PANEL JACKS

Antenna Input
Use the INPUT button to select Antenna.
Audio/Video Inputs AV1, AV2, AV3 and AV4
By using the INPUT button, or the individual INPUTS buttons of the remote control, you can select each video source. Use the audio
and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (if you have mono
sound, insert the audio cable into the left audio jack).
NOTE:
See page 20 for Input AV4 (SCART).
MONITOR OUT
These jacks provide fixed audio and video signals (ANTENNA, AV1~AV4) which are used for recording. Component signal to
Input AV1 and AV2, RGB inputs will not have monitor output.
S-VIDEO AV3
AV3 provide S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.
Component: Y-P P Inputs
B R
AV1 and AV2 provide Y-P
use composite video signal for AV1 and AV2.
NOTES:
1. S-Video has a higher priority over video input.
2. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the
Plasma Monitor's P B input and the components R-Y output to the Plasma Monitor's P R input.
3. Your component outputs may be labeled Y-C B C R . In this case, connect the component C B output to the Plasma
Monitor's P B input and the component C R output to the Plasma Monitor's P R input.
4. It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-P B P R inputs (See page 36).
5. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-P B P R jacks, and
RGB inputs.
INPUT (AV4)
SCART
20 18 16 14 12 10 8 6 4 2
21 19 17 15 13 11 9 7 5 3 1
P jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may
B R
External device connection terminals
13