Table of Contents
Advertisement
4. Other signal formats may not be displayed correctly. Use AUTO ADJUST to automatically adjust the horizontal position, vertical
position, clock, and phase. We recommend you use a signal, which has more than 50% of amplitude of white area at each corner
of the picture, when performing Auto Adjustment. It may not work correctly with dark picture (see page 85).
5. Input signal level.
Interlaced signal is not available.
NOTE:
6. RGB input signal will not appear at all when receiving a signal which is not supported by this product. If the setting is wrong, the
Display Monitor will display:
POWER SAVING mode will come
on after 10 seconds.
NOTE: 1. If the Display Monitor cannot display a signal, please try AUTO ADJUST to display the signal. This is used to initialize
the MultiScan Converter.
2. Not all signals have AUTO ADJUST feature (see page 85).
3. Set-Top-Box and DVD player input signal does not have AUTO ADJUST feature.
SYNC
TTL level H/V separate signal
RGB INPUT 0.7Vpp/1.0Vpp
NO SYNC. SIGNAL
Without sync
RGB ON SCREEN DISPLAY
INVALID SCAN FREQ.
Either horizontal or vertical
frequency is inappropriate
or out of range.
INVALID SCAN FREQ. will disappear
after 60 seconds.
84
Advertisement
Table of Contents
