Table of Contents
Advertisement
HOW TO USE THE REMOTE
TO CONTROL YOUR LCD TV
VOLUME (VOL) WHEEL, MUTE button
Use the VOL WHEEL (
To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the VOL wheel down. Press
the VOL wheel again to turn the sound off completely (MUTE). To restore the sound, press the VOL wheel one more time, or VOL
Up ( ).
Volume 8
Closed Captioning will display automatically when MUTE/SOFT MUTE is on and Closed Caption is set to AUTO (see page 79).
When the TV power is turned off at a volume level 31 or greater, the volume level will default to 30 when the TV is turned on.
However, if it is set to a level 30 or less, the volume level will be at the level it was set when the TV is turned ON.
CHANNEL (CH) WHEEL/CHANNEL SELECTOR buttons
The CHANNEL wheel or the CHANNEL SELECTOR buttons are used to select channels, lock access code, etc. Use the
CHANNEL WHEEL (
or
numbers to select channels. Enter "0" first for channels 1 to 9, or simply press the single digit channel you wish to tune then wait
a few seconds for the TV to tune. For Digital Channels, use the CHANNEL SELECTOR buttons with the (-) DASH button. Channel
selection may also be performed by CHANNEL WHEEL up ( ) or CHANNEL WHEEL down ( ).
Press the channel (CH) wheel to switch to Favorite (FAV) channel mode. You will know you are in Favorite Channel mode when
(FAV) is displayed and the displayed channel is GREEN. Press it again to return to your regular tuned channels. You can add any
channel to your Favorite channel list by pressing and holding down the Channel (CH) wheel until the displayed channel turns from
WHITE to highlighted GREEN. You can also delete a channel from your favorite channel list by pressing and holding down the
Channel (CH) wheel until the displayed channel turns highlighted GREEN to WHITE.
Ant A 22
(-) DASH button
Use the (-) DASH button with the CHANNEL SELECTOR buttons to enter Digital Channels that have subchannel numbers indicated
by (-) DASH (example 15-1).
LAST CHANNEL (LC) button
Press this button to toggle between the current and last channel viewed.
or
) until you obtain the desired sound level.
) to select the desired channel. Use the CHANNEL SELECTOR buttons to enter one, two, or three
Soft Mute 8
FAV Ant A 22
41
Mute 8
Ant A 22
Advertisement
Table of Contents
