Table of Contents
Advertisement
CHANNEL MANAGER
Select Signal Meter when using an indoor or outdoor antenna. This feature will show the signal strength and peak
Signal Meter
values of the Antenna signal to help you adjust your antenna to optimize signal reception.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move
Select
SEL
Use the CURSOR PADS and the SELECT button to highlight and select "close" to exit.
NOTE:
The Signal Meter will not be available (grayed out) when watching analog channels.
This function allows you to review which channels are labeled (CH ID), which have been added to Channel
Channel List
Memory (SCAN), which are protected by LOCK and which are your Favorite (FAV) Channels.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move
SEL
Select
Use the CURSOR PADS to navigate the Channel List.
Press the CURSOR PAD (
Press the EXIT button to return to normal viewing.
When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by you and your cable
NOTE:
operator.
or
) to select On or Off on the Scan column.
Chan. Manager
Signal Meter
Channel
:
Strength
:
Peak
:
or
Return
Move
SEL
Channel List (Cable)
CH#
Scan
3
On
FAV
FAV
4
On
5
On
6
On
7
On
8
On
9
On
or
10
On
Move
/
SEL
Return
65
3-
1
1
Close
CH ID
Lock
-------
-------
-------
-------
-------
-------
-------
-------
Advertisement
Table of Contents
