Hitachi 32HDL51 Operating Manual page 74

Video 2 Auto Link
Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to
input 2.
Setup
Set The Inputs
Rename List
Video1 AVR
Video2 CAM
Video3 CBL
Video4 CBL2
Video5 Reset
Auto Link
Auto
Video Power Save
Move Return
SEL
Use CURSOR PAD , ,
When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is
convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR,
laserdisc, or DVD) and any of the buttons on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit the menu.
NOTES:
1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
2. When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after
three hours.
Set Black Side Panel
NOTES:
1. To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3
signal with gray side bar.
2. Depending on received signals, some images and Closed Caption displays may be missing when the Black Side
Panel is set to Auto 1 or Auto 2.
DVD PVR STB2
DVD2 PVR2 VCR
DVD3 SAT VCR2
LD STB VCR3
Remote Off
, then press the SELECT button to change AUTO LINK setting.
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Standard mode.
Setting
Signal
NTSC/480i/480p
Gray
Aspect: 4:3 standard
1080i (4x3 source)
Black Black
Aspect: 16:9 standard
1080i (4x3 source with
Black Black
logo on corner
Aspect: 16:9 standard
Setup
Set The Inputs
Video1
Video2
Video3
Video4
Video5
Auto Link
Video Power Save
Move
SEL
Off On Auto 1 Auto 2
Black Gray Gray
Gray Gray
Black Gray
74
Rename List
AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Auto Remote Off
Return
Recomended
Aspect
4x3
Expanded
4x3
Expanded
4x3
Expanded
SETUP