The Remote Control - Hitachi 32HDL51 Operating Manual

THE REMOTE CONTROL

In addition to controlling all the functions on your HITACHI LCD TV, the new remote control is designed to operate different types
of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one
touch. Basic operation keys are grouped together in one area.
To operate your LCD TV, point the remote control at the remote sensor of the AVC box/Display Monitor and select the TV by
pressing the or button of the Source Access on the remote. The TV mode indicator will blink, indicating that the remote will
now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and select PVR by pressing the
Source Access on the remote. The PVR mode indicator will blink, indicating that the remote will now control your VCR (see page
45 for instructions on how to program the remote to control your VCR).
To operate your PVR (Personal Video Recorder), point the remote at the remote sensor of the PVR and select PVR by pressing
the or button of the Source Access on the remote. The PVR mode indicator will blink, indicating that the remote will now
control your PVR (see page 45 for instruction on how to program the remote to control your PVR).
To operate your cable box, point the remote at the remote sensor of the cable box and select the CABLE (CBL) by pressing the
or button of the Source Access on the remote. The CBL mode indicator will blink, indicating that the remote will now control
your cable box (see page 42 for instructions on how to program the remote to control your cable box).
To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and select the SET-
TOP-BOX (STB) by pressing the
button to program your satellite receiver. The STB mode indicator will blink, indicating that the remote will now control your set-
top-box (see page 43 for instructions on how to program the remote to control your set-top-box).
To operate your DVD player, point the remote at the remote sensor of the DVD player and select DVD by pressing the
button of the Source Access on the remote. The DVD mode indicator will blink, indicating that the remote will now control your
DVD Player (see page 44 for instruction on how to program the remote to control your DVD
player).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and select
AMP by pressing the or
remote will now control your audio equipment (see page 46 for instructions on how to program the remote to control additional
Audio/Video equipment).
A/V NET
GUIDE
or button of the Source Access on the remote. If you have a satellite receiver, use this
button of the Source Access on the remote. The AMP mode indicator will blink, indicating that the
NOTE:
When you are in a dark room, press any button on the remote to light up the buttons. The
illumination will light for a few seconds during this time and the current mode indicator will
flash one time. These buttons will not appear to light if the room is too bright.
27
or button of the
or