Hitachi 32HDL51 Operating Manual page 76

Set Monitor Out
This feature will select the source of the Monitor Output.
Setup
Menu Preference
Screen Saver
Set The Inputs
Set Black Side Panel
Set Closed Captions
Set Monitor Out
Select
Move
SEL
Monitor- Select Monitor to output the audio and video signals of the chosen input source (ANT A, ANT B, VID1-VID5) to a VCR or other
A/V device.
TV Tuner Out- Select TV Tuner Out to output the audio and video signals of the last watched Antenna Source (ANT A, ANT B).
Use CURSOR PAD , to highlight the function to change then press the SELECT button to select the function.
Press EXIT to quit menu or CURSOR PAD
CableCARD Info
Select this feature to access your CableCARD ID and HOST ID. Please have this information ready when
you call your cable operator (see also page 13).
Setup
CableCARD Info.
Set AV Control
Upgrades
Set Stand-By Mode
Move Select
SEL
Set AV Control
This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions
from an external home control system.
Setup
CableCARD Info.
Set AV Control
Upgrades
Set Stand-By Mode
Select
Move
SEL
Use the CURSOR PADS and the SELECT button to check the Connected RS232C box.
NOTE:
For use with third party home Audio/Video control systems which are commercially available. Please see your dealer
regarding these "non Hitachi" home control systems.
to return to previous menu.
76
Setup
Set Monitor Out
Video Out
Monitor
TV Tuner Out
Move Return
SEL
Setup
CableCARD Info.
Select the button below to access
your CableCARD ID and Host ID.
CableCARD Info
Move Select
SEL
Setup
Set AV Control
If you want to use the AV Control
function, please set the RS232C.
Connected RS232C
Move Return
SEL
SETUP