Auto Aspect; Vertical Position - Hitachi 32HDL51 Operating Manual

ASPECT
Aspect
Use this function to select the Picture Format Aspect Ratio.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel

Auto Aspect

Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press CURSOR PAD , , to select menu item.
Press the Select button to select. A " " in the box indicates that the feature is ON.
NOTES: 1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on composite video, S-Video, and 480i component signals.
3. See page 29 for Aspect Mode availability.

Vertical Position

This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press CURSOR PAD , , to select menu item.
Press CURSOR PAD or
Press EXIT to quit the MENU, or select Aspect to return to the main menu.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Move Sel.
SEL
to adjust the function.
Aspect
Mode
16:9 Standard
4:3 Standard
4:3 Zoom1
Auto Aspect
Vertical Position
Move
59
16:9 Zoom
4:3 Expanded
4:3 Zoom2
0
Return
SEL