Replacing The System Board - Dell Vostro 1200 Service Manual

1 M2.5x5-mm screw
Replacing the System Board
1. Carefully place the system board into the computer base.
2. Replace the one M2.5x5-mm screws in the system board.
3. Replace the processor (see
4. Replace the processor thermal-cooling assembly (see
5. Replace the fan (see Replacing the
6. Replace the palm rest (see
7. Replace the display assembly (see
8. Replace the Mini Card (see Mini
9. Replace the keyboard (see
10. Replace the hinge cover (see
11. Replace the memory module(s) (see
12. Replace the hard drive (see
13. Replace the battery (see Replacing the
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
14. Turn the computer over and turn it on.
Back to Contents Page
Replacing the Processor Module).
Replacing the Processor Thermal-Cooling
Fan).
Replacing the Palm Rest).
Replacing the Display Assembly).
Cards).
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing the Memory Module).
Replacing the Hard Drive).
Battery).
Assembly).