Table of Contents
Advertisement
Back to Contents Page
Speakers
Dell™ Vostro™ 1200 Service Manual
Removing a Speaker
Replacing the Speaker
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
Removing a Speaker
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the hinge cover (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the palm rest (see
NOTICE:
Handle the speakers with care to help prevent damaging them.
7. Disconnect the speaker cables for both the left and right speaker from the system board.
8. Remove the M2.5x5-mm screws from both speakers.
1 speaker cables (2) 2 M2.5x5-mm screws (2)
3 speakers (2)
9. Remove the speaker cables from the routing clips and remove the speakers.
Replacing the Speaker
NOTICE:
Handle the speakers with care to help prevent damaging them.
1. Route the speaker cables back through the routing clips and connect the speaker cables to the system board.
Begin.
Battery).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Palm
Rest).
Advertisement
Table of Contents
