Replacing The Palm Rest - Dell Vostro 1200 Service Manual

1 M2.5x5-mm screw
11. Disconnect the touch pad cable from the system board using the cable release levers.
1 touch pad cable
12. Lift the palm rest and remove it from the computer.
Replacing the Palm Rest
1. Align the palm rest with the computer base and gently snap it into place.
2. Connect the touch pad cable to the system board.
3. Replace the M2.5x5-mm screw on the palm rest.
4. Replace the display assembly (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Replace the hard drive (see
8. Replace the fan (see Replacing the
9. Connect the Mini Card cables to the WLAN card (see
10. Replace the nine M2.5x8-mm screws and the M2.5x5-mm screw on the component cover on the bottom of the computer.
11. Replace the five M2.5x8-mm and the two M2x3-mm screws on the bottom of the computer.
12. Replace the optical drive (see
13. Replace the battery (see Replacing the
2 cable release levers
Replacing the Display Assembly).
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing the Hard Drive).
Fan).
Replacing a WLAN
Replacing the Optical Drive).
Battery).
Card).