Using The Sleep Timer - Hitachi HTD-K160 Instruction Manual

Using the Sleep Timer

Using the Sleep Timer
Using the Sleep Timer Using the Sleep Timer Using the Sleep Timer
You can set the system to turn off automatically at a specified
time.
P O WER
ST ANDB Y
DVD
TUNER
AUX 2
5
ENT
8
A-B REPEAT SLEEP
0
PROG N/P
MENU/ PBC OPEN/CLOSE
SLOW/ MEMORY
TITLE SETUP
PLAY/PAUSE
Language Sub Title Zoom
ADJ/VOL
AUDIO ANGLE EQ
Go To Return DISPLAY SELECT
LISTENING MUTE
1
Press the SLEEP button while the power is on.
Each time you press SLEEP, the time changes as shown
below.
120 (minutes) 110
60 50 40 30
120 ...
When you have specified the time, the "Sleep" indicator lights
on the front panel display.
2
If no button has been pressed in 5 seconds, the Sleep timer
setting will be completed and the system start to time.
3
You can check the time remaining before the system turns
off.
Press SLEEP, the remaining time appears on the front panel
display for a few seconds.
100 90 80 70
20 10 00 (OFF)
4
You can reset the time using SLEEP.
5
The system will enter Standby mode once the Sleep time
arrived.
note
If pressed the OPERATE or STANDBY button, the sleep timer
that has been set already will be cancelled.
41