General Setup; Tv Display Setting; Tv Type Setting; Video Out Setting - Hitachi HTD-K160 Instruction Manual

GENERAL SETUP

GENERAL SETUP GENERAL SETUP GENERAL SETUP GENERAL SETUP

TV DISPLAY Setting

TV DISPLA TV DISPLA Y Setting Y Setting Y Setting
TV DISPLA TV DISPLA Y Setting
Path: Main Page General Page
Select the aspect ratio of the TV set connected.
The default setting is underlined.
•
PAN SCAN: When a normal TV is connected. Display a wide
picture on the whole screen with a portion (right and left sides)
automatically cut off.
•
LETTER BOX: When a normal TV is connected. Display a
wide picture with black bands appearing at the top and bottom
of the screen.
•
WIDE 16:9:Select to play wide-screen video on a wide-screen
TV.
PAN SCAN
LETTER BOX
WIDE 16:9
Note
•
Some wide-screen discs that do not permit Pan & Scan
mode playback are automatically played in Letterbox mode.
•
You must set the screen mode on your wide-screen TV to
"FULL".
•
If WIDE is selected and a normal TV is connected, 16:9
content will appear distorted during playback (objects look
thin).

TV TYPE Setting

TV TYPE Setting
TV TYPE Setting TV TYPE Setting TV TYPE Setting
TV DISPLAY
Path: Main Page
Select the correct color TV system.
The default setting is underlined.
•
•
•

VIDEO OUT Setting

VIDEO OUT Setting VIDEO OUT Setting VIDEO OUT Setting VIDEO OUT Setting
Path: Main Page
Select the video output terminals.
The default setting is underlined.
•
•
General Page
AUTO: Select the output of the video signal either PAL or NTSC
in multi system.
NTSC: Change the video signal of a PAL in NTSC system.
PAL: Change the video signal of a NTSC in PAL system.
General Page
S-VIDEO: Composite video output and S-video output are
available.
RGB: Color separate signal output are available.
TV TYPE
VIDEO OUTPUT
29